 |
Laser
Reference Home
L1 Laser | L3
Laser | L4 Lasers | L5
Laser | L6 Laser | Accessories | Warranty
| Make Your Decision |
 |
R7 Laser Receiver
The R7 Electronic Laser Receiver combines
an affordable price with the features of high end, high cost laser receivers.
It works with all Pro Shot laser transmitters, and most other brands of
rotating lasers on the market. Grade information is conveyed via a LCD
front panel display, a LED display on its backside, and audio tones. The
visual display now provides 5 channels of information, high, high fine,
on grade, low fine, and low. The user can select between three operating
accuracies, ultra-fine (±1/64 inch), standard (±1/16 inch), and coarse
(±1/8 inch). The R7 provides between 500 and 1000 feet (152m to 305m)
of working range depending upon which Pro Shot transmitter it is paired
with. The receiver runs for approximately 60 hours on a 9V alkaline battery.
|
 |
| MT-1 Ceiling
Target
The MT-1 Ceiling Target is for use
with the L2+ or any visible beam rotary lasers. It attaches magnetically
to the suspended ceiling grid.
|
|
 |
The W1 is designed to clip
to the wall angle on drop ceiling jobs, or is used to lay the lasers
down into the vertical mode. In vertical mode, the W1 can be set on
the floor, or threaded onto a tripod. (The L2, L2+, L4, L4+, and L1-S
lasers can all be used in the vertical mode.) The W1 allows the L2+
to be wall mounted on ceiling jobs, and will double as a lay down
bracket when the laser is used in vertical mode.
|
|
 |
|
 |
The S1 Adapter allows the
L1-AS and L1-S lasers to be used on jobs where a dual slope is called
for. The adapter sits on top of the laser transmitter, and allows
the laser to be rotated in a precise fashion. Comes with a chart that
provides the proper slope and rotation settings for the job.
|
|
 |
T2 Aluminum Telescopic
Tripod
The T2 is an aluminum telescopic leg tripod with a 5/8 x 11 thread.
It adjusts from about 3 1/2 feet to 5 1/2 feet in height. The telescopic
leg segments are held by quick release levers.
|
|
 |
P1-PLUMB
PLATE
The P1 Plumb Plate enables one to position the L4+ laser over a point
on the floor, so that its plumb beam can transfer that point above
to the ceiling.
|
|
|
MORE ACCESSORIES
|
