| LASERKERF
KITS |
PRICE |
QUANTITY |
 Model
100
Laserkerf kit includes: Model 100, for thin kerf, 3/32" blades,
6'AC cord with on/off switch and 2 cable clamps
Stock# 100 |
$79.00 |
|
Model
125
Laserkerf kit includes: Model 125,for standard kerf,1/8" blades,
6'AC cord with on/off switch and 2 cable clamps.
Stock# 125
|
$79.00 |
|
 Model
100B
Model 100B is the battery version of the model 100,2' cord with
on/off switch and 2 cable clamps,powered by 2AA batteries (not included)
Stock# 100B
|
$79.00 |
|
Model
125B
Model 125B
is the battery version of the model 125,2' cord with on/off switch
and 2 cable clamps,powered by 2AA batteries (not included) Stock#
125B |
$79.00 |
|
 Model
100H
Laserkerf kit includes: Model 100H for thin kerf, 3/32"
blades, 6'AC cord with on/off switch and 2 cable clamps.
Stock# 100H |
$79.00 |
|
Model
125H
Laserkerf kit includes: Model 125H for standard kerf, 1/8"
blades, 6'AC cord with on/off switch and 2 cable clamps.
Stock# 125H |
$79.00 |
|
 Model
125HB
Battery version of the Model 125H for standard kerf,1/8" blades,
requires 2 AA batteries,on/off switch and 2 cable clamps.
Stock# 125HB |
$79.00 |
|
Model
100HB
Battery version of the Model 100H for thin kerf, .093-.109",
blades , requires 2 AA batteries, on/off switch and 2 cable clamps.
Stock# 100HB
|
$79.00 |
|
|
|
|
| BRACKETS |
PRICE |
QUANTITY |
 B-1
Bracket B-1 is used to create a flat area sufficient to attach the
Laserkerf to the saw. An example would be the Dewalt 705
Stock# B1 |
$4.00 |
|
 B-2
Bracket B-2 is used to create a flat area sufficient to
attach the Laserkerf to the saw. An example would be the Dewalt
708 type 1-3 Stock# B2 |
$4.00 |
|
 W-1
The W-1 Wedge is used to attach the Laserkerf to most slider type
miter saws Stock# W1 |
$4.00 |
|
 B-3
Bracket B-3 is a 1" angle 1 1/8" long. used for attaching
the Laserkerf to radial arm saws
Stock# B-3
|
$4.00 |
|
 B-5
Bracket B-5 is a 2" angle 1 1/8" wide. An example would
be the Dewalt 708 type 4 Stock# B-5
|
$4.00 |
|
 B-6
Bracket B-6 is a 2" angle 3.5" long. An example would
be for the Ridgid MS1250
Stock# B-6 |
$4.00 |
|
 B-7
Bracket B-7 is a 2" angle 3.5" long. An example would
be for the Sears 10" left mount
Stock# B-7 |
$4.00 |
|
 W-3
The W-3 wedge is used to attach the Laserkerf Model H to slider
type miter saws. An example would be for the Hitachi C10FS.
Stock# W-3
|
$4.00 |
|
B-8
Used to create a smooth area on sliders that have a mesh stlye bottom.
Stock# B-8 |
$4.00 |
|
 B-9
Used to mount the laser to the Dewalt 703
Stock# B-9 |
$4.00 |
|
 Miter-Pal
Miter and bevel alignment gag.e Stock# MP1 |
$17.95 |
|
B-12
Used to mount the laser to the Makita 1221. Stock# B-12 |
$4.00 |
|
B-13
Used to mount the laser to the Ridgid MS1060. Stock# B-13 |
$4.00 |
|
B-14
Used to mount the laser to The upper blade guard of radial arm saws,
typically without a bottom blade guard. Stock# B-14 |
$4.00 |
|
| B-11
Used to mount the laser to the Chicago 45885. Stock# B-11 |
$4.00 |
|
B-15
Used to mount the laser to the kick back of radial arm saws, typically
without a bottom blade guard. Stock# B-15 |
$4.00 |
|
 B-16
Bracket B-16 is a 2" angle 3" long. An example would be
for the Delta 36-235.
Stock# B-16 |
$4.00 |
|
B-17
Bracket B-17 is used on single tube sliding miter saws. An example
would be the Makita LS1211. Stock# B-17 |
$4.00 |
|
B-18
Bracket B-18 is used on the Delta 36-412. Stock# B-18 |
$4.00 |
|
|
|
