FREE SHIPPING - On orders over $300 - Applies to UPS Ground Only (No Common Carrier) - Click here for details
LASERKERFPatent Pending
21st CENTURY LASER TECHNOLOGY FOR YOUR SAW
Home
Laserkerf Kits & Installation Photos
Laserkerf Features
Miter saw
Radial-Arm Saw
Laser Accuracy
Place Order/Cart
Q & A
 
FEATURES

View another feature:
Alignment AC-DC Powered Beam Width Instant material alignment
Cost Cutting Angles Effect on blade Safety

ALIGNMENT

The accuracy of the laser beam to the blade is extremely important. The horizontal and angular adjustments allow you to set the laser beam in exact alignment with your saw blade.

Become familiar with the adjustments on the Laserkerf. and locate the proper position on your saw to attach the laser (see the miter and radial saw pages).
Clamp a 4"wide block of wood in your saw and cut a divot about 3" long.
The laser beam should be directly in line with the blade as shown
Clean the surface that the laser will be attached to with mineral sprits or similar cleaner. Allow to dry completely. Remove backing from the adhesive and position the laser so that the beam is over the divot. Press Laserkerf onto the saw.
Adjust the yellow ring to get the beam parallel to the divot.
Adjust the horizontal adjustment so that the beam falls completely into the divot.

The Laserkerf is now aligned exactly with your saw blade.

Laserlevels.net Number One Source for Laser Levels and Accessories
LASERLEVELS.NET © Copyright 1997-2010 Laserlevels.net is not taking orders at this time
Laserlevels.net Featured Laser Product Lines
AGATEC   APACHE   BEA LASERS   CHECKPOINT   CST / BERGER   DAVID WHITE   DISTO
JOHNSON LEVELS   LASERJAMB   LASERKERF   LASER REFERENCE   LASER SQUARE   LEICA
NORTHWEST INSTRUMENT   PACIFIC LASER SYSTEMS   SPECTRA PRECISION  STANLEY