The 510S-GC
laser sets up fast, it's totally automatic in both horizontal and
vertical modes. There are no leveling screws or vials to rough level.
Just turn it on and it's ready to go! Most laser have either scanning
or chalk line, the 510S-GC has
both. Oscillating beam intensifies laser line and is easier to see
at longer distance. Two separate beams create a constant 90°
angle. The 510S-GC has features needed for installing acoustical ceilings, partitions, flooring, framing and more.
510S-GC Self-Leveling Laser Features
Automatic
self-leveling in both horizontal and vertical
No
leveling screws or vials to adjust
No rough
leveling required, as with lasers using pendulum compensators
No extra
accessories needed for vertical
Integrated, all-in-one design
Wall mount is built into the laser; no need to carry and set up extra accessories
Slope mount also integrated into laser base; no separate grade mount needed for inclined planes. Match any two slope reference points from 1° to 90° in manual mode
Motorized wall mount
Use remote control with motorized mount to adjust height of the laser from a distance
Save time when changing from mold height to grid height or clearing low-hanging obstacles
In vertical position, remote moves laser back and forth for easy positioning over a point for layout and wall and partition installation
Electronic motorized leveling
Uses electronic
vials and servo-motors to level
More rugged
than delicate wire-hung compensators
Not affected
by temperature variations
35X more
leveling range than wore compensators
Both scanning and chalk line
scanning
mode: concentrates beam in a defined work area: easier to see beam further away
Solid non-scanning chalk
line: ideal for short distances
Electronic calibration
If required,
laser is easy to calibrate by the user
|
|
Constant squaring
Split beam for 90° angles
and vertical plumb
Left/right adjustable
Square shot or chalk line can be adjusted left or right with the remote control, detector, or laser keypad
Remote control capability
Use the
detector or remote control to: stop, start, or change direction
or laser rotation; move the square shot left or right; and control
scanning and calibration
H. I. Alert
Shuts the
laser off automatically if the laser is disturbed, preventing
inaccurate readings
Known as
"Height of Instrument Alert" or "Tilt"
Available
30 seconds after instrument has self-leveled
Long battery life
160 hours
with 2D alkaline batteries (510S-GC)
40 hours
with rechargeable battery pack (510S-GCR)
Exterior and Interior Applications
Horizontal and vertical self-leveling laser
Ideal for aligning and squaring tilt-up walls, partitions, decks, and foundations
Unique built-in motorized mount
Includes combination detector and remote laser control with rod clamp
Interior package includes: rechargeable laser with built-in wall mount, remote control, ceiling target, laser-enhancing glasses, carrying case. Exterior package includes: detector/remote control. |
510S-GC Self-Leveling Laser Specifications
Recommended
use (diameter) - 1,000 ft.
(300 meters) | Accuracy
- +/- 1/8" at 100 ft. (+/- 0,015%)
Leveling range - +/- 5.7°, +/- 10%
| Laser diode - 635nm Class II Ia< 2mW
Leveling - electronic, motorized self-leveling in horiz
and vert | Modes - automatic
leveling and manual
Battery life - Rechargeable: 40 hrs. / 2 "D" Alkaline: 160
hrs. | Weight - 3
lbs. (1,3 kg) |
|
|
